Continued Innovation in Respiratory Care: The Importance of Inhaler Devices

Article information

Tuberc Respir Dis. 2018;81(2):91-98
Publication date (electronic) : 2018 March 22
doi : https://doi.org/10.4046/trd.2017.0119
Woolcock Institute of Medical Research, University of Sydney, Sydney, Australia.
Address for correspondence: Sinthia Zrinka Bosnic-Anticevich, B.Pharm. (Hons.), Ph.D. Woolcock Institute of Medical Research, University of Sydney, 431 Glebe Point Road, Glebe, Sydney, NSW 2037, Australia. Phone: 61-2-9114-0145, Fax: 61-2-9114-0014, Sinthia.bosnic-anticevich@sydney.edu.au
Received 2017 October 31; Revised 2017 November 03; Accepted 2017 November 06.

Abstract

When it comes to the use in inhalers in the management of chronic obstructive pulmonary diseases, there are many options, considerations and challenges, which health care professionals need to address. Considerations for prescribing and dispensing, administering and following up, education, and adherence; all of these factors impact on treatment success and all are intrinsically linked to the device selected. This review brings together relevant evidence, real-life data and practice tools to assist health care professionals in making decisions about the use of inhalers in the management of chronic obstructive pulmonary diseases. It covers some of the key technical device issues to be considered, the evidence behind the role of inhalers in disease control, population studies which link behaviors and adherence to inhaler devices as well as practice advice on inhaler technique education and the advantages and disadvantages in selecting different inhaler devices. Finally, a list of key considerations to aid health care providers in successfully managing the use of inhaler devices are summarized.

Introduction

Despite the existence of evidence-based guidelines, strategies and educational material for patients, asthma control remains a problem in the community. The reasons for this are multifactorial and well document and include incorrect diagnosis, co-morbidities, such as allergic rhinitis, smoking, suboptimal medication dosing, and other phenotypes1. In this, inhaler technique is an important medication-related issue. While it is often not the only problem, it appears to consistently be a problem and often co-exists with poor adherence2345678. Despite the complexity of the relationship between adherence, inhaler technique and disease control, improving inhaler technique and ensuring that the most appropriate inhaler is used by the patient, is critical to achieving good disease outcomes9101112.

In order to overcome the issue of inhaler technique and effective drug delivery, device designers work to make innovative devices that will enable the effective delivery of drug to the lung13. However, these innovations are often complex and from the health care providers perspective, it comes down to several more fundamental factors, which also include inhaler technique.

Technical Characteristics of the Device

The key to using inhaler devices to deliver medication in respiratory diseases is to ensure that medication is delivered effectively to the lungs, i.e., that drug delivery from the inhaler devices results in drug deposition in the lower airways. Deposition of drug into the lungs is directly correlated with the clinical effects of the drug1415 and therefore is an important feature of device design.

While it is accepted that optimal inhaler use is more than just selecting the inhaler, it is important for health care professionals to understand the key technical features of devices. It is often within these technical features that device designers and manufacturers build innovation and sophisticated technology. These technical features are often promoted as the key difference between the different inhalers and certainly do impact on the specific way in which an inhaler is to be used.

There are a range of technical characteristics that are important when it comes to the design of inhalers; however, aerosol velocity, aerosol duration, particle size, and internal device resistance are most commonly noted16171819. Below is a discussion of these features as they relate to patient use and potential considerations.

1. Aerosol velocity and aerosol duration

Aerosol velocity relates to the velocity of the aerosol as it leaves the inhaler i.e. how quickly the aerosol comes out of the device; while aerosol duration relates to the length of time it takes for a dose of the aerosol to be released from the inhaler. Both aerosol velocity and aerosol duration are related to pressured metered dose inhalers (pMDI) as they relate to a device in which aerosol is released from the device and the speed and duration of this research can not be controlled by the user (i.e., it is independent of inspiratory flow of the user). In practical terms, both aerosol velocity and aerosol duration have implications with regards to the patient's ability to coordinate inspiration and actuation of their pMDI, and subsequently to the amount of drug deposited either into the airways or into the orophargyneal cavity20.

With regards to aerosol velocity, the concept is that the faster the aerosol velocity, the more critical the co-ordination of inspiration. If a patient actuates too early, i.e., before they start to inspire or if a patient coordinates too late, i.e., after they have almost finished inspiring, suboptimal dose of aerosol will be deposited in the lungs and instead will be deposited in the oropharyngeal cavity.

With regards to aerosol duration, the concept is that the longer it takes for all the drug to be released from the pMDI, the more forgiving the device is in terms of coordinating the inspiration and device actuation, i.e., the longer the aerosol duration, the longer time it takes for all the drug to be released and minimizing the impact of poor coordination.

Both aerosol velocity and aerosol duration become important technical features for device consideration for patients who continue to have trouble coordinating inspiration and device actuation, even following repeated training.

2. Particle size

It is well established that in order for the drug particles released from a device to penetrate into the lungs, they need to be of a particular particle size212223. A highly efficient device is one, which releases a high proportion of drug within the respirable particle size of 1–5 µm242526. That is, an efficient device is one in which has a high fraction of the emitted dose from an inhaler that has the potential to be deposited into the lungs. This is known as the fine particle dose (also the respirable dose). The higher the fine particle dose released from the inhaler, the more efficient the drug as a higher proportion of delivered drug is deposited in the lower airways. Consequently, the more drug deposited in the lower airways, the less deposited higher up in the respiratory tract, including the oropharyngeal cavity16.

3. Internal device resistance

Internal devices resistance is a technical characteristic of dry powder inhalers (DPIs), which relates to the “force” required to be created inside the device, in order for a fine particle dose to be released. This “force” is generated by the inhalation rate used by the patient when using the DPI, together with the resistance (and hence design) inside an inhaler27. Devices with high internal resistance require the patient to inhale more forcefully from the inhaler than devices with low resistance. There is a large difference between inhalers when it comes to internal resistance28 and this impacts on the way in which the different inhalers need to be used.

In practical terms, this is most directly related to the inspiratory flow that can be generated by the patient, which, in some cases when airway function is severely compromised, may compromise the fine particle fraction delivered into the lungs27. It should be noted that while high resistance inhalers require more forceful inspiration, forceful inspiration through a low resistance inhaler may also be problematic, having implications for drug deposition in the oropharyngeal cavity. Therefore, when it comes to internal resistance of an inhaler, it is important for the patient to follow the instructions issued by the manufacturer.

Use of the Device

While much research and development goes into the design and manufacture of new and novel inhalers, meta-analysis has shown that as long as the patient uses their device correctly, i.e., are able to demonstrate correctly technique as articulated in the manufacturer's instructions, good clinical outcomes can be achieved2930. Therefore, the way in which the patient uses the device is critically important.

It has long been established and continues to be recognized that the inhaler technique of patients using inhaler devices is poor, with a high proportion of patients not being able to demonstrate correct use of their inhaler31. The issue of poor inhaler technique is important and the importance of this issue is reflected, in the fact that inhaler technique is noted over 70 times in the latest global strategies for the management of asthma and chronic obstructive pulmonary disease (COPD)3233. In fact, outside of the process of diagnosis, inhaler technique is noted within the reports across all areas within the management process, whether it be in training a patient on inhaler technique when the device/medication is first prescribed or reviewing inhaler technique over time.

The reason for this focus on inhaler technique is because evidence indicates that poor inhaler technique often co-exists with poor adherence and poor disease control23456. In fact, the CRITIKAL study has identified that specific inhaler technique errors (i.e., “critical” errors) are associated with increased risk of negative asthma outcomes, including poor control and increased exacerbations34. While recent research exploring inhaler technique in patients with chronic obstructive pulmonary disease finds a similar relationship between poor inhaler technique and severe COPD exacerbations35. Further to this, research shows that when inhaler technique is corrected, improvements in asthma control are observed and risk of future exacerbations is reduced9101112.

Improving Inhaler Technique

After decade of recording inhaler technique, it can be said that inhaler technique research has been a field of research in itself. However, from the practical perspective and certainly for health care providers, there are several key principles to consider when attempting to ensure that correct technique is used.

1. Inhaler technique is devices specific

Inhaler technique is device specific, i.e., regardless of device type, device technique is specific for the actual device. For this reasons, patient and health care provider organizations produce device specific checklists and videos and these need to be used to ensure that each device is used correctly. Device-specific resources are easily available on the internet and mostly free of charge. An example of the breadth of resources available in Australia is found on a series of website produced by national organisations such as the National Asthma Council3637 and NPSMedicineWise38.

2. The method of training inhaler technique is important

Although most patients can be taught how to use their inhaler device, the most effective method of training includes a one-on-one physical demonstration with a placebo inhaler394041. This needs to be completed by a health care professional or health educator who is able to use an inhaler correctly and is knowledgeable with regards to some of the common misconceptions regarding different devices42. Research shows that the ability of health care providers to demonstrate correct technique is poor and without training, most devices are not intuitive to use43. There is evidence that utilizing technology to provide patients with feedback on specific errors may also be helpful44.

3. Inhaler technique is not stable

Inhaler technique is not necessarily stable and even though a patient can be taught the skill, inhaler technique education needs to be repeated to ensure that patients maintain correct technique over time. Research, conducted with a range of different inhaler devices, consistently shown that even though a majority of patients can be taught how to use a device (i.e., they are able to learn the skill), up to 50% of patients come back to the health care provider 1 month later, making inhaler technique errors404445. Therefore, inhaler technique needs to be checked and, where appropriate, corrected over time.

4. Inhaler technique and adherence are related

In addition to the fact that poor inhaler technique and poor adherence commonly co-exist2345678, there is evidence that these two constructs may be related in a more fundamental way7. This follows research showing that inhaler technique maintenance is related to patient psychosocial factors, such as motivation46; while further exploration of this motivation provides insights that patients' perceptions of the threat posed by their asthma, their perceived confidence in the strategies suggested for managing their asthma and their confidence in carrying out those strategies are linked to their ability to retain correct inhaler technique over time47. Research further goes to show that recent self-reported adherence, may be a predictor for future inhaler technique maintenance48.

5. Patient preference

When deciding on which inhaler device might best suit a patient, it is important to consider that the factors important to a patient may not necessarily be those important for the health care provider. The concept of a patient using an inhaler because they prefer it is an interesting one. There have been a numbers of studies exploring patient satisfaction and preference, attempting to link these constructs to the patient's ability (or willingness) to use their inhaler4950515253. It should be noted that often the studies reporting patient preference or satisfaction do so as an aside to comparing two or more inhalers on some other aspect of use and then asking patients for their preferences. Invariably, patients report a preference for the new inhaler. It is difficult to interpret the importance of this to the actual use of the inhaler. What is known is that in real-life, patients rarely get a choice of which inhaler they would like to use and often consider the inhaler and the medication contained in it as one entity54.

The Strength and Weakness of Different Devices in Practice

Given the consideration that devices different in how they can be used from a technical perspective, there are therefore considerations that can be made regarding the use of inhalers, and potentially the importance of selecting an inhaler that will suit the patient. Table 1 provides a simple summary of key aspects of the three main devices types and some of the specific factors that may be considered strengths and weaknesses for use. Some of these factors relate to the technical features of the devices, others relate to user aspects, which may impact on the likelihood of the device being used appropriately. Figure 1 provides a guide to a decision-making process, which can be used health care providers by health care professionals to guide selection of devices.

Summary of strengths and weakness of pressurized metered dose inhalers (pMDIs), dry powder inhalers, and soft mist inhalers

Figure 1

Pathway to device selection. Modified from Dekhuijzen et al. Respir Med 2013;107:1817–21, according to the Creative Commons license63. pMDI: pressurized metered dose inhaler; DPI: dry powder inhaler.

Conclusion

There are a number of factors that could be considered in in selecting a device for a patients; however, it is important to note that ultimately, regardless of the inhaler devices prescribed, unless the patient is able to use the inhaler correctly and as recommended by the health care professional, only sub-optimal disease management will be achieved. Therefore, following the recommendation of any inhaled medication, it is important for health care professionals to effectively train the patient in the use of their inhaler and to regularly follow up with any addition inhaler technique education to ensure that the patient maintains correct inhaler technique over time.

Notes

Conflicts of Interest: Advisory Boards consultancies/Lecture honorarium: AZ, GSK, TEVA Pharmaceuticals, Mundipharma, Boehringer Ingelheim.

Grant received from: Australian Research Council, Department of Health and Aging, University of Sydney, Commonwealth Govt of Australia (Guild Govt Agreement Scheme), Commonwealth Govt of Australia (Rural and Remote Pharmacy Workforce Development Program), NHMRC Cooperative Research Centre for Asthma, NHMRC Centre for Research Excellence in Severe Asthma, Asthma Foundation of NSW, Scherring Plough, TEVA Pharmaceuticals, AstraZeneca, Zentiva, Mundipharma International, MEDA Pharmaceuticals, Research in Real Life Pty (UK), University of Michigan, USA.

References

1. Haughney J, Price D, Kaplan A, Chrystyn H, Horne R, May N, et al. Achieving asthma control in practice: understanding the reasons for poor control. Respir Med 2008;102:1681–1693. 18815019.
2. Reddel HK, Sawyer SM, Everett PW, Flood PV, Peters MJ. Asthma control in Australia: a cross-sectional web-based survey in a nationally representative population. Med J Aust 2015;202:492–497. 25971575.
3. Nathan RA, Thompson PJ, Price D, Fabbri LM, Salvi S, Gonzalez-Diaz S, et al. Taking aim at asthma around the world: global results of the asthma insight and management survey in the Asia-Pacific region, Latin America, Europe, Canada, and the United States. J Allergy Clin Immunol Pract 2015;3:734–742.e5. 26116167.
4. Price D, Fletcher M, van der Molen T. Asthma control and management in 8,000 European patients: the REcognise Asthma and LInk to Symptoms and Experience (REALISE) survey. NPJ Prim Care Respir Med 2014;24:14009. 24921985.
5. Armour CL, Lemay K, Saini B, Reddel HK, Bosnic-Anticevich SZ, Smith LD, et al. Using the community pharmacy to identify patients at risk of poor asthma control and factors which contribute to this poor control. J Asthma 2011;48:914–922. 21942306.
6. Sriram KB, Percival M. Suboptimal inhaler medication adherence and incorrect technique are common among chronic obstructive pulmonary disease patients. Chron Respir Dis 2016;13:13–22. 26396159.
7. Braido F, Chrystyn H, Baiardini I, Bosnic-Anticevich S, van der Molen T, Dandurand RJ, et al. “Trying, but failing”: the role of inhaler technique and mode of delivery in respiratory medication adherence. J Allergy Clin Immunol Pract 2016;4:823–832. 27587316.
8. Newman S. Improving inhaler technique, adherence to therapy and the precision of dosing: major challenges for pulmonary drug delivery. Expert Opin Drug Deliv 2014;11:365–378. 24386924.
9. Basheti IA, Reddel HK, Armour CL, Bosnic-Anticevich SZ. Improved asthma outcomes with a simple inhaler technique intervention by community pharmacists. J Allergy Clin Immunol 2007;119:1537–1538. 17433831.
10. Giraud V, Allaert FA, Roche N. Inhaler technique and asthma: feasability and acceptability of training by pharmacists. Respir Med 2011;105:1815–1822. 21802271.
11. Goris S, Tasci S, Elmali F. The effects of training on inhaler technique and quality of life in patients with COPD. J Aerosol Med Pulm Drug Deliv 2013;26:336–344. 23421900.
12. Harnett CM, Hunt EB, Bowen BR, O'Connell OJ, Edgeworth DM, Mitchell P, et al. A study to assess inhaler technique and its potential impact on asthma control in patients attending an asthma clinic. J Asthma 2014;51:440–445. 24393080.
13. Lavorini F, Fontana GA, Usmani OS. New inhaler devices: the good, the bad and the ugly. Respiration 2014;88:3–15. 24902629.
14. Newman SP. Can lung deposition data act as a surrogate for the clinical response to inhaled asthma drugs? Br J Clin Pharmacol 2000;49:529–537. 10848716.
15. Newman SP, Wilding IR, Hirst PH. Human lung deposition data: the bridge between in vitro and clinical evaluations for inhaled drug products. Int J Pharm 2000;208:49–60. 11064211.
16. Capstick TG, Clifton IJ. Inhaler technique and training in people with chronic obstructive pulmonary disease and asthma. Expert Rev Respir Med 2012;6:91–101. 22283582.
17. Dalby RN, Eicher J, Zierenberg B. Development of Respimat((R)) soft mist inhaler and its clinical utility in respiratory disorders. Med Devices (Auckl) 2011;4:145–155. 22915941.
18. Cheng YS. Mechanisms of pharmaceutical aerosol deposition in the respiratory tract. AAPS PharmSciTech 2014;15:630–640. 24563174.
19. Bonini M, Usmani OS. The importance of inhaler devices in the treatment of COPD. COPD Res Pract 2015;1:9.
20. Donnell D. Optimizing drug delivery to the lung: design of a CFC-free corticosteroid metered-dose aerosol system. Drug Dev Ind Pharm 2001;27:111–118. 11266222.
21. Labiris NR, Dolovich MB. Pulmonary drug delivery. Part II: the role of inhalant delivery devices and drug formulations in therapeutic effectiveness of aerosolized medications. Br J Clin Pharmacol 2003;56:600–612. 14616419.
22. Labiris NR, Dolovich MB. Pulmonary drug delivery. Part I: physiological factors affecting therapeutic effectiveness of aerosolized medications. Br J Clin Pharmacol 2003;56:588–599. 14616418.
23. Usmani OS. Small-airway disease in asthma: pharmacological considerations. Curr Opin Pulm Med 2015;21:55–67. 25415404.
24. Chrystyn H. Is total particle dose more important than particle distribution? Respir Med 1997;91(Suppl A):17–19. 9474362.
25. Chrystyn H. Anatomy and physiology in delivery: can we define our targets. Allergy 1999;54(Suppl 49):82–87.
26. Chege JK, el-Araud KA, Clark BJ, Chrystyn H. Optimal particle size for aerosols. Thorax 1997;52:586–587. 9227735.
27. Chrystyn H. Is inhalation rate important for a dry powder inhaler? Using the In-Check Dial to identify these rates. Respir Med 2003;97:181–187. 12587970.
28. Ciciliani AM, Langguth P, Wachtel H. In vitro dose comparison of Respimat((R)) inhaler with dry powder inhalers for COPD maintenance therapy. Int J Chron Obstruct Pulmon Dis 2017;12:1565–1577. 28603412.
29. Dolovich MB, Ahrens RC, Hess DR, Anderson P, Dhand R, Rau JL, et al. Device selection and outcomes of aerosol therapy: evidence-based guidelines: American College of Chest Physicians/American College of Asthma, Allergy, and Immunology. Chest 2005;127:335–371. 15654001.
30. Brocklebank D, Ram F, Wright J, Barry P, Cates C, Davies L, et al. Comparison of the effectiveness of inhaler devices in asthma and chronic obstructive airways disease: a systematic review of the literature. Health Technol Assess 2001;5:1–149.
31. Sanchis J, Gich I, Pedersen S, Aerosol Drug. Aerosol Drug Management Improvement Team (ADMIT). Systematic review of errors in inhaler use: has patient technique improved over time? Chest 2016;150:394–406. 27060726.
32. Global Initiative for Chronic Obstructive Lung Disease. GOLD reports Global Initiative for Chronic Obstructive Lung Disease; 2017.
33. Deweerdt S. Global strategy for asthma management and prevention Bethesda: Global Initiative for Asthma; 2016.
34. Price DB, Roman-Rodriguez M, McQueen RB, Bosnic-Anticevich S, Carter V, Gruffydd-Jones K, et al. Inhaler errors in the CRITIKAL study: type, frequency, and association with asthma outcomes. J Allergy Clin Immunol Pract 2017;5:1071–1081.e9. 28286157.
35. Molimard M, Raherison C, Lignot S, Balestra A, Lamarque S, Chartier A, et al. Chronic obstructive pulmonary disease exacerbation and inhaler device handling: real-life assessment of 2935 patients. Eur Respir J 2017;49:1601794. 28182569.
36. National Asthma Council Australia. Inhaler technique for people with asthma or COPD South Melbourne: National Asthma Council Australia; 2016.
37. National Asthma Council Australia. How to-videos 2017 [Internet] South Melbourne: National Asthma Council Australia; 2017. cited 2017 Oct 23. Available from: https://www.nationalasthma.org.au/health-professionals/how-to-videos.
38. NPSMedicineWise. 2017 Inhaler devices for respiratory medicines 2017 [Internet] Strawberry Hills: NPSMedicine-Wise; 2017. cited 2017 Oct 23. Available from: https://www.nps.org.au/medical-info/consumer-info/inhaler-devices-forrespiratory-medicines.
39. Basheti IA, Reddel HK, Armour CL, Bosnic-Anticevich SZ. Counseling about turbuhaler technique: needs assessment and effective strategies for community pharmacists. Respir Care 2005;50:617–623. 15871755.
40. Bosnic-Anticevich SZ, Sinha H, So S, Reddel HK. Metered-dose inhaler technique: the effect of two educational interventions delivered in community pharmacy over time. J Asthma 2010;47:251–256. 20394511.
41. Axtell S, Haines S, Fairclough J. Effectiveness of various methods of teaching proper inhaler technique. J Pharm Pract 2017;30:195–201. 26912531.
42. Levy ML, Dekhuijzen PN, Barnes PJ, Broeders M, Corrigan CJ, Chawes BL, et al. Inhaler technique: facts and fantasies: a view from the Aerosol Drug Management Improvement Team (ADMIT). NPJ Prim Care Respir Med 2016;26:16017. 27098045.
43. Bosnic-Anticevich S, Callan C, Chrystyn H, Lavorini F, Nikolaou V, Kritikos V, et al. Inhaler technique mastery and maintenance in healthcare professionals trained on different devices. J Asthma 2018;55:79–88. 28332886.
44. Toumas-Shehata M, Price D, Basheti IA, Bosnic-Anticevich S. Exploring the role of quantitative feedback in inhaler technique education: a cluster-randomised, two-arm, parallel-group, repeated-measures study. NPJ Prim Care Respir Med 2014;24:14071. 25393603.
45. Basheti IA, Armour CL, Bosnic-Anticevich SZ, Reddel HK. Evaluation of a novel educational strategy, including inhaler-based reminder labels, to improve asthma inhaler technique. Patient Educ Couns 2008;72:26–33. 18314294.
46. Ovchinikova L, Smith L, Bosnic-Anticevich S. Inhaler technique maintenance: gaining an understanding from the patient's perspective. J Asthma 2011;48:616–624. 21623690.
47. Ovchinikova LA. “Knowing how” is not enought: a mixed methods exploration of inhaler technique maintenance in patients with asthma Sydney: University of Sydney; 2014.
48. Azzi E, Srour P, Amour C, Rand C, Bosnic-Anticevich S. Practice makes perfect: self-reported adherence a possible marker of inhaler technique maintenance. Res Social Adm Pharm 2016;12:e37–e38.
49. Alismail A, Song CA, Terry MH, Daher N, Almutairi WA, Lo T. Diverse inhaler devices: a big challenge for health-care professionals. Respir Care 2016;61:593–599. 26786742.
50. Davis KH, Su J, Gonzalez JM, Trudeau JJ, Nelson LM, Hauber B, et al. Quantifying the importance of inhaler attributes corresponding to items in the patient satisfaction and preference questionnaire in patients using Combivent Respimat. Health Qual Life Outcomes 2017;15:201. 29037248.
51. Miravitlles M, Montero-Caballero J, Richard F, Santos S, Garcia-Rivero JL, Ortega F, et al. A cross-sectional study to assess inhalation device handling and patient satisfaction in COPD. Int J Chron Obstruct Pulmon Dis 2016;11:407–415. 27013871.
52. Riley JH, Tabberer M, Richard N, Donald A, Church A, Harris SS. Correct usage, ease of use, and preference of two dry powder inhalers in patients with COPD: analysis of five phase III, randomized trials. Int J Chron Obstruct Pulmon Dis 2016;11:1873–1880. 27578968.
53. van der Palen J, Thomas M, Chrystyn H, Sharma RK, van der, Goosens M, et al. A randomised open-label crossover study of inhaler errors, preference and time to achieve correct inhaler use in patients with COPD or asthma: comparison of ELLIPTA with other inhaler devices. NPJ Prim Care Respir Med 2016;26:16079. 27883002.
54. Jahedi L, Downie SR, Saini B, Chan HK, Bosnic-Anticevich S. Inhaler technique in asthma: how does it relate to patients' preferences and attitudes toward their inhalers. J Aerosol Med Pulm Drug Deliv 2017;30:42–52. 27676193.
55. Terzano C. Pressurized metered dose inhalers and add-on devices. Pulm Pharmacol Ther 2001;14:351–366. 11603949.
56. Newman SP. Inhaler treatment options in COPD. Eur Respir Rev 2005;14:102–108.
57. Newman SP. Principles of metered-dose inhaler design. Respir Care 2005;50:1177–1190. 16122401.
58. Kaur I, Aggarwal B, Gogtay J. Integration of dose counters in pressurized metered-dose inhalers for patients with asthma and chronic obstructive pulmonary disease: review of evidence. Expert Opin Drug Deliv 2015;12:1301–1310. 25564302.
59. Lavorini F, Mannini C, Chellini E, Fontana GA. Optimising inhaled pharmacotherapy for elderly patients with chronic obstructive pulmonary disease: the importance of delivery devices. Drugs Aging 2016;33:461–473. 27216613.
60. Dal Negro RW, Bonadiman L, Turco P. Prevalence of different comorbidities in COPD patients by gender and GOLD stage. Multidiscip Respir Med 2015;10:24. 26246895.
61. Pitcairn G, Reader S, Pavia D, Newman S. Deposition of corticosteroid aerosol in the human lung by Respimat Soft Mist inhaler compared to deposition by metered dose inhaler or by Turbuhaler dry powder inhaler. J Aerosol Med 2005;18:264–272. 16181001.
62. Anderson P. Use of Respimat Soft Mist inhaler in COPD patients. Int J Chron Obstruct Pulmon Dis 2006;1:251–259. 18046862.
63. Dekhuijzen PN, Vincken W, Virchow JC, Roche N, Agusti A, Lavorini F, et al. Prescription of inhalers in asthma and COPD: towards a rational, rapid and effective approach. Respir Med 2013;107:1817–1821. 24120398.

Article information Continued

Funded by : Australian Research Councilhttp://dx.doi.org/10.13039/501100000923
Funded by : University of Sydneyhttp://dx.doi.org/10.13039/501100001774
Funded by : Commonwealth Govt of Australia
Funded by : National Health and Medical Research Councilhttp://dx.doi.org/10.13039/501100000925
Funded by : TEVA Pharmaceuticalshttp://dx.doi.org/10.13039/100006259
Funded by : AstraZeneca Australiahttp://dx.doi.org/10.13039/501100005205
Funded by : Zentiva
Funded by : Mundipharma International
Funded by : MEDA Pharmaceuticals
Funded by : Research in Real Life Pty
Funded by : University of Michiganhttp://dx.doi.org/10.13039/100007270

Figure 1

Pathway to device selection. Modified from Dekhuijzen et al. Respir Med 2013;107:1817–21, according to the Creative Commons license63. pMDI: pressurized metered dose inhaler; DPI: dry powder inhaler.

Table 1

Summary of strengths and weakness of pressurized metered dose inhalers (pMDIs), dry powder inhalers, and soft mist inhalers

Summary
Pressurized metered dose inhalers pMDIs deliver a predefined dose of medication in the form of a fast and short-lasting aerosol55. Drug delivery requires coordination of pMDI activation with a deep and slow inhalation, followed by breath-holding56.
 Strengths555657 Compact and portable
Dose consistency
Multidose (>10 doses)
Can be used with a wide range of inhaler therapies
Not affected by humidity
 Weaknesses565859 Rapid-moving and short-lasting aerosol
Contains propellant
Low lung deposition/high oropharyngeal deposition
‘Cold freon’ effect
Requires good coordination of actuation and inhalation
The majority of devices lack a dose counter
Dry powder inhalers (DPIs) DPIs require energy from the patient's inhalation to disperse a powder formulation from the device into smaller particles56. The flow rate required to produce a successful release of fine particles depends on the intrinsic resistance of the device and the precise inhalation technique required1960. New-generation DPIs are ‘active’, using battery power to disperse the drug formulation and reduce the need for a high respiratory flow rate but are more expensive than passive DPIs59.
 Strengths525661 Compact and portable
Convenient (multidose)
Breath-actuated
No propellants
Minimal coordination required
May have a dose counter
 Weaknesses5258596061 Passive inhaler
The flow rate to generate the fine particle fraction and release the drug is dependent on the internal resistance of the device, and varies between DPIs
Moisture-sensitive
High oropharyngeal deposition
Dose inconsistency
For low-resistance DPIs, the high inspiratory flow required to disaggregate the drug can result in high oropharyngeal impaction and low lung deposition
Soft mist inhalers Inhalers (Respimat) that produce a soft mist with low velocity, long-lasting aerosol17. It is recommended that patients take a slow, deep breath followed by a breath-hold for 10 sec62.
 Strengths5258596061 Active inhaler
Compact and portable
Easier to coordinate than pMDIs
Low inspiratory flow required
High lung deposition/low oropharyngeal deposition
High fine particle fraction
Consistent dosing (active inhaler)
Multi-dose (1-mo supply) with dose indicator
No propellant
Not affected by humidity
 Weaknesses52555859606162 Requires some coordination of actuation and inhalation
Requires priming before first use
Require hand grip strength for loading the cartridge, an issue for patients with weak manual strength
If unused for a period of time, additional priming is required
Inhaler must be discarded once all doses are delivered or 3 mo after preparation for the first use